The PD44 is specifically designed to repeatably dispense volumes from 0.005 cc's up to 5 cc's of two part Silicones, Epoxies, and Urethanes materials.    Download PD44 brochure

​The PD44 Valve features balanced inlet/outlet spool assemblies that do not displace material while shifting from the reload to the dispense position. This allows pressure feeding of the “A” and “B” components up to 1200 psi during reloading while isolating the materials from the mixer inlet. Upon shifting to the dispense position, an accurate volume of “A” and “B” components is injected into the disposable mixer inlet by rod displacement metering technology. ​Shots from 0.005 to 5 cc’s and handle material ratios from 1:1 to 25:1.

PD44 -Micrometer Specifications

Maximum Operating Temperature	150 deg F (65 deg C)
Maximum Inlet Pressure	1200 psi (8MPa, 83 bar)
​Maximum Air Working Pressure	100 psi (0.7 MPa, 7 bar)
Supplied Air Requirements	1 to 3 cfm at 80 psi to 100 psi
Ratio Range (depending on metering rods selected)	1:1 to 25:1
Shot Size Range (depending on metering rods selected)	0.005 cc to 5.0 cc
​Maximum Cycle Rate (application dependent)	​​Micrometer PD44: Up to 60 cycles per minute
Dimensions (H x L x W), height to end of material inlet block	Micrometer PD44: 17.5 x 4.13 x 7.57 in. (445 x 105 x192 mm)
​​Sound Data*	14-15 lb (6.35 -6.80 kg)
Weight	76.6 dBA
Wetted Parts	Hardened steel, 303/304, 404, UHMWPE, Tungsten, carbide, fluoroelastomer, EPDM, PTFE

Search PD44 Operation Manuals

Typical Configurations

Videos