Precision Electronic shot and bead dispensing technology for two component materials
The Graco Electric Fixed Ratio (EFR) meter, mix and dispense system for two component sealant and adhesive delivery is ideal for applications requiring precision dispense, The EFR provides superior control over material dispense rates for critical bead, encapsulation, mold filling, and lamination applications. Feel comfortable choosing a unit that is easy to configure and very easy to maintain. The EFR offers a wide range of ratio choices and can be connected to multiple material systems.
The electric motor directly controls the movement in the pumps so that the requested flow rate is achieved directly from the start. With the additional automatic calibration cycle, snake heads at the start and end are eliminated.
The EFR gives you the versatility to choose the material and flow rates you need no matter your project requirements. While the motor is powerful enough to give you a high output up to 3.2L per minute, the precise encoder helps you control the flow to reach very low flows or small shots consistently. |
|
EFR Technical Specifications
Drive |
Precision Controlled Servo Drive Motor |
Material delivery |
Shot or Bead |
Flow rate |
1 to 3200 cc/min |
Supply type |
Bulk supply from 20 L pails to 200 L drums and larger totes. |
Shot range |
0.1 grams + |
Mix ratio range |
1:1 to 12:1 |
Maximum fluid working pressure |
3500 psi (24 MPa, 241 bar) |
Maximum fluid temperature |
120° F (50° C) |
Electrical Power |
280V or 480V |
Wetted parts |
Stainless steel, zinc-plated carbon steel, brass, tungsten carbide, chrome, fluoroelastomer, PTFE, ultra-high molecular weight polyethylene, silicon nitride |
Weight |
320 – 401 lbs (145–182 kg) |
Dimensions ( H x L x W ) |
22 x 50 x x 22.5 in (56 x 127 x 57 cm) |
Gateway |
EtherNet/IP, DeviceNet, Profibus, Profinet |