Nozzle Selection GuideUse the following information to identify the correct nozzle configuration for your application. Each section below provides configuration options with a specific number. Use the visual guide to reference the correct number quantity and placement for each section. When completed, the final nozzle configuration should include 13 individual numbers.

1. Nozzle Style
SN713 - Small Size (SN713 Series) Nozzle
0663, M0668, M0700 - Small Size (SN713 Series) Super Short Nozzle
SN712 - Medium Size (SN712 Series) Nozzle
M0707 & M0712 - Medium Size (SN712 Series) Super Short Nozzle
SN714 - Large Size (SN714 Series) Nozzle


2. Tip Style
1A - Standard Length 1/2” Radius Ball Nose (A, B, C)
2A - 12mm Diving Tip (B)
3A - Flat Tip (A, B, C)
4A - Extended Length 1/2” Radius Ball Nose (A, B, C)
6A - Shortened Length 1/2” Radius Ball Nose (A & B)
8A - 15mm Diving Tip, Screw-In Tip (A & B)
9A - 20mm Diving Tip, Screw-In Tip (A & B)
10A - 25mm Diving Tip, Screw-In Tip (A & C)
11A - Shortened Length 25mm Diving Tip, Screw-In Tip (A)
12A - Shortened Length 15mm Diving Tip, Screw-In Tip (A & B)
13A - Direct Cavity Shut-Off Nozzle Tip (B)
14A - Shortened Length 20mm Diving Tip, Screw-In Tip (B)
15A - Standard Length 10mm Radius Ball Nose (B)
16A - Extended Length 10mm Radius Ball Nose (B)
XSH - Super Short Length (D, E, F, G)

3. SPCSpecial Modification
SN713 Series ONLY: Shortened Nozzle Base & Nozzle Pin

4. Outlet Hole Diameter.078 - Standard Diameter Outlet (A, B & D)
.094 - Special Diameter Outlet (A, B & D)
.103 - Standard Diameter For Direct Cavity Shut-Off Tip (ONLY B)
.109 - Standard Diameter For Diving Tips (ONLY B & C)
.125 - Standard Diameter For Diving Tips (ONLY A & F)
.147 - Special Diameter Outlet (A, F, G)
.188 - Standard Diameter Outlet (C)
.210 - Special Diameter Outlet (C)

​