|
Dynamini
DYNAMINITM hot melt adhesive supply units provide exceptional value in a small hot melt unit which has been designed for optimal performance, reliability and simplified daily operation. The DG IITM is designed for flexibility and can be used in various configurations depending upon your application.
|
DYNAMINITM Adhesive Supply Unit
- Melt-on-Demand Hopper Grid extends adhesive life and performance
- 7 year Melt-on-Demand hopper warranty
- Self-diagnostic P.I. digital Temperature controller with platinum sensor
DG IITM Hand Applicator
- Rotary swivel or ball swivel with top or bottom hose connections
- Ergonomic handle with a clear sight line to the nozzle tip
- Easy to change cartridge-style heater and sensor
Configured System Consists of:
- DynaminiTM adhesive supply unit
- Hot melt adhesive hose
- DG IITM hand applicator
- Bead or swirl nozzle
|
Shown with optional cart, boom assembly, tool balancer, and hose cradle
|
|
System
|
N05
|
|
Hopper Capacity
|
5k (10lbs)
|
|
Operating Temperature
|
40 to 218°C (100 to 425°F)
|
|
Melt Rate (per hour)*
|
8kg/hr (17.3lb/hr)
|
|
Pump Rate (piston)
|
.91 kg/min (2lb/min)
|
|
Piston Pump Compression Ratios
|
12:1
|
|
Gear Pump
|
1.5, 3.2, & 4.5 cc/rev
|
|
Hose Output Zones
|
2
|
|
Maximum Working Hydraulic Pressure
|
6.8 MPa (1000psi) - Piston Pump
|
|
Temperature Control Stability
|
± 1°C (1 °F)
|
|
Electrical Service Standard
|
100 to 120 VAC 1 Phase 50/60 Hz
|
|
Electrical Service Standard
|
200 to 240 VAC 1 Phase 50/60 Hz
|
|
Working Viscosity
|
500 - 50,000 cps
|
*Melt rates vary with adhesive type. All units capable of 2 hoses and applicators. Units can be fitted with a piston or gear pump. |
 |
|
Dimensions
|
N05
|
|
Height (H)
|
45cm (17.75in)
|
|
Depth (D)
|
54cm (21 .25in)
|
|
Width (W)
|
29cm (11 .38in)
|
|
Weight (empty)
|
34.47kg (76lbs)
|
|
 |
Electronics & Solar | Consumables | Automation | Packaging & Filtration | Fenestration & Construction | Epoxy Paste | Vehicle Manufacturing
866 967 4660 | DispenseRite Inc. 2012
|
